Application of composite iron-containing material for shielding electromagnetic fields of ultra-high and higher frequency
ID елемента: 22390
2026/05/05
Цитування
eNUPPIR (). Application of composite iron-containing material for shielding electromagnetic fields of ultra-high and higher frequency. https://enuppir.politeh.duckdns.org/item/22390
eNUPPIR. "Application of composite iron-containing material for shielding electromagnetic fields of ultra-high and higher frequency." Web. . <https://enuppir.politeh.duckdns.org/item/22390>.
eNUPPIR. "Application of composite iron-containing material for shielding electromagnetic fields of ultra-high and higher frequency." Accessed . https://enuppir.politeh.duckdns.org/item/22390.
Скопійовано в буфер обміну
Властивості
Назва
Англійська
Application of composite iron-containing material for shielding electromagnetic fields of ultra-high and higher frequency
Українська
ЗАСТОСУВАННЯ КОМПОЗИЦІЙНОГО ЗАЛІЗОВМІСНОГО МАТЕРІАЛУ ДЛЯ ЕКРАНУВАННЯ ЕЛЕКТРОМАГНІТНИХ ПОЛІВ УЛЬТРАВИСОКИХ І ВИЩИХ ЧАСТОТ
Опис
Англійська
Changes in the transmission, reflection and absorption coefficients of electromagnetic radiation by composite materials with a mass content of carbonyl iron of 40% and 60% in the dielectric matrix were investigated. It was found that the transmission coefficients of electromagnetic radiation in the frequency range of 2–12 GHz decrease from 0.80–0.85 to 0.10–0.30. Accordingly, the reflection coefficients of electromagnetic waves increase from 0.05–0.08 to 0.22–0.28. At the same time, higher reflection coefficients are observed at frequencies of 8–10 GHz for samples with a lower content of carbonyl iron. In the future, this indicator increases and stabilizes. The decrease in the reflection coefficient of electromagnetic waves with the content of a conductive substance in the dielectric material can be explained by the achievement of the percolation effect – an increase in the conductivity of the material. This occurs when conductivity circles are formed in the material due to signifi cant values of the electromagnetic constants of the filler particles. Therefore, when designing composite materials, one should be guided by the volumetric content of the filler in the dielectric matrix. The obtained data allow one to calculate the complexdielectric and magnetic permeability of materials. This will further simplify the design of composite materials with the required protective properties. In the process of designing protective materials and structures, one should take into account the diff erent dependences of the loss tangent angle for dielectric and conductive materials. This limit for compositions is somewhat conditional, therefore, a prerequisite for the development of protective materials is the determination of the amplitude -frequency characteristics of the fields that require shielding.
Українська
Досліджено зміни коефіцієнтів проходження, відбиття та поглинання електромагнітних випромінювань композиційними матеріалами із масовим вмістом карбонільного заліза 40 % та 60 % у діелектричній матриці. Встановлено, що коефіцієнти проходження електромагнітного випромінювання у частотному діапазоні 2–12 ГГц знижуються з 0,80–0,85 до 0,10–0,30. Відповідно коефіцієнти відбиття електромагнітних хвиль підвищуються від 0,05–0,08 до 0,22–0,28. При цьому на частотах 8–10 ГГц спостерігаються вищі коефіцієнти відбиття для зразків з меншим вмістом карбонільного заліза. У подальшому цей показник збільшується і стабілізується. Зниження коефіцієнта відбиття електромагнітних хвиль при вмісті провідної субстанції у діелектричному матеріалі можна пояснити досягненням перколяційного ефекту – підвищенням провідності матеріалу. Це відбувається при утворенні у матеріалі кіл провідностей через значні значення електромагнітних констант частинок наповнювача. Тому при проєктуванні композиційних матеріалів слід керуватися об’ємним вмістом наповнювача у діелектричній матриці. Отримані дані дозволяють розрахувати комплексні діелектричні та магнітні проникності матеріалів. Це у подальшому спростить проєктування композиційних матеріалів з потрібними захисними властивостями. У процесі проєктування захисних матеріалів і конструкцій слід враховувати різні залежності тангенса кута втрат для діелектричних і провідних матеріалів. Дана межа для композицій дещо умовна, тому попередньою умовою для розроблення захисних матеріалів є визначення амплітудно-частотних характеристик полів, які потребують екранування.
Автор
Англійська
Burdeina, N.
Англійська
Zozulya, L.
Англійська
Petrunok, T.
Українська
Бурдейна, Н. Б.
Українська
Зозуля, Л. А.
Українська
Петруньок, Т. Б.
Тематика
Англійська
composite material
Англійська
electromagnetic radiation shielding
Англійська
reflection coefficient
Англійська
electrophysical properties
Українська
композиційний матеріал
Українська
екранування електромагнітного випромінювання
Українська
коефіцієнт відбиття
Українська
електрофізичні властивості
Видавництво
Українська
Національний університет «Полтавська політехніка імені Юрія Кондратюка»
Тип
info:eu-repo/semantics/article
info:eu-repo/semantics/publishedVersion
Українська
Рецензована Стаття
Формат
application/pdf
Ідентифікатор
https://journals.nupp.edu.ua/sunz/article/view/3690
10.26906/SUNZ.2025.1.165-168
Джерело
Англійська
Control, Navigation and Communication Systems. Academic Journal; Vol. 1 No. 79 (2025): Control, Navigation and Communication Systems; 165-168
Російська
Системы управления, навигации и связи. Сборник научных трудов; Том 1 № 79 (2025): Системи управління, навігації та зв’язку; 165-168
Українська
Системи управління, навігації та зв’язку. Збірник наукових праць; Том 1 № 79 (2025): Системи управління, навігації та зв’язку; 165-168
2073-7394
10.26906/SUNZ.2025.79
2025. №1 (79)
Мова
uk
Відношення
https://journals.nupp.edu.ua/sunz/article/view/3690/3029
Права
Українська
http://creativecommons.org/licenses/by-nc/4.0
Інформація про метадані
Створено
2026-5-5 11:56
Остання зміна
2026-5-5 11:56
ID елемента
#22390