Збірник наукових праць. Серія: Галузеве машинобудування, будівництво
Викладення результатів досліджень із механізації будівельних робіт, проектування й експлуатації будівельних споруд, удосконалення будівельних конструкцій; розглянуті сучасні проблеми механіки ґрунтів, геотехніки та фундаментобудування
Assessing the reliability of noise simulation models in a built-up area
In modern environments, noise is a dominant factor negatively impacting the urban ecosystem and, ...
Experimental and numerical study of full-scale reinforced concrete beams with 3DCP permanent formwork
The performance of a box-type permanent 3DCP formwork for full-scale reinforced concrete beams wa...
Assessment of the morphological composition of secondary construction waste from destruction
The issues of post-war reconstruction of territories and settlements that suffered extensive dama...
Reliability of Buildings and Structures: General Requirements, Terms, and Indicators
Modern buildings and structures, with their increasing complexity in design and operation, are tr...
Invariance of reinforcement and concrete cohesion within the energy approach
The work studies the problem of analytical description of reinforcement and concrete cohesion, wh...
Stress-Strain State Analysis of a Shallow Spherical Shell Fabricated Using 3DCP
Experimental and numerical investigations of the stress–strain behavior and load-bearing capacity...
Modelling of Organo-Mineral Complexes in the System “Lime-Zeolite-Enzyme” for Purifying Technically Polluted Water from Suspended Solids and Compacting Sediment
The article presents the results of experimental and statistical modelling to determine the optim...
Mobile 3D Mapping Using Geodetic Drones and GPS Navigation
The paper examines current trends in the development of geodetic mapping, with a particular focus...
Numerical studies of the resistance of concrete keyed joints with rectangular keys in reinforced concrete structures
Numerical investigations were carried out on the behavior of keyed joints with rectangular keys i...
Research on the drive of a plant for the preparation and transportation of building mortars
Modern mixing plants for the preparation of mortar and concrete mixtures are an important compone...
Changes in the Stress-Strain State of Precast Reinforced Concrete Floor Systems in Masonry Multi-Storey Buildings after Non-Design Impacts
The article is devoted to investigating non-design impacts on precast reinforced concrete floor s...
Comprehensive analysis of stability and strength of thin-walled reinforced concrete elements based on energy approaches
This work develops and substantiates a comprehensive engineering method for the analysis of thin-...
Design of civil defense protective structures in residential multi-story buildings for individual use
The military actions in Ukraine, which daily create a threat to the civilian population, necessit...
Strengthening Technology for Damaged Floor Slabs through Compression Zone Enlargement and External Reinforcement
The article presents a technology for strengthening reinforced concrete floor slabs by enlarging ...
Experience in Strengthening Prefabricated Reinforced Concrete Floor Systems During the Rehabilitation of Industrial Buildings
The article presents practical experience in combined reinforcing of precast reinforced-concrete ...
Physical and mechanical properties of bitumen modified with energy-saving additives based on surface-active substances
The article examines the influence of modern energy-saving additives based on surface-active agen...
Green Construction: Innovations, Energy Efficiency, and Prospects for Ukraine
This article explores the concept of green construction as a pioneering approach in contemporary ...
Specific aspects of vertical roller mills design selection
The article analyzes specific design selection aspects of vertical roller mills, essential for gr...
Study of factors affecting the energy consumption of the mixing plant for the preparation of aerated concrete
The current stage of development of the construction industry is characterized by increased requi...
Machine Diagnostics in Mechatronic Systems: Analysis Methods and Intelligent Technologies
The article examines modern approaches to machine diagnostics within mechatronic systems using si...
Conditioning of boron-containing LRW with composite binders
Modern management of liquid radioactive waste (LRW) requires mandatory conditioning, which they p...
Flexural Behaviour of 3DCP Beams with Expanded Metal Sheet Reinforcement: Experimental Investigation and Numerical Verification
An experimental and numerical study of the flexural behavior of 3D-printed concrete (3DCP) beams ...
Restoration measures for foundations of metal silos on degraded loess soils
This paper examines the restoration of the serviceability of foundations of steel silos located o...
Analysis of the Possibility of Adapting Basement Premises in Multi-Story Buildings as Civil Protection Shelters
The article examines the possibility of adapting basement premises in multi-story buildings in li...
Strain Energy Density-Based Topology Optimization Using SIMP and Local Failure Criteria for 3D-Printed Concrete Structures
This paper presents a strain energy density–based topology optimization method tailored for britt...
Assessing the reliability of noise simulation models in a built-up area
In modern environments, noise is a dominant factor negatively impacting the urban ecosystem and, consequently, the health of city residents. Noise exposure reduces labor productivity and the effici...
Experimental and numerical study of full-scale reinforced concrete beams with 3DCP permanent formwork
The performance of a box-type permanent 3DCP formwork for full-scale reinforced concrete beams was assessed through experimental testing and numerical analysis. Eight beams were tested under four-p...
Assessment of the morphological composition of secondary construction waste from destruction
The issues of post-war reconstruction of territories and settlements that suffered extensive damage as a result of hostilities are considered. Rational design and construction solutions are propose...
Reliability of Buildings and Structures: General Requirements, Terms, and Indicators
Modern buildings and structures, with their increasing complexity in design and operation, are transforming into unique engineering systems, the failure of which can lead to significant material, m...
Invariance of reinforcement and concrete cohesion within the energy approach
The work studies the problem of analytical description of reinforcement and concrete cohesion, which determines the malleability of loop joints and butt joints of prefabricated reinforced concrete ...
Stress-Strain State Analysis of a Shallow Spherical Shell Fabricated Using 3DCP
Experimental and numerical investigations of the stress–strain behavior and load-bearing capacity of a shallow spherical concrete shell fabricated using extrusion-based 3D printing are presented. T...
Modelling of Organo-Mineral Complexes in the System “Lime-Zeolite-Enzyme” for Purifying Technically Polluted Water from Suspended Solids and Compacting Sediment
The article presents the results of experimental and statistical modelling to determine the optimal composition of organo-mineral complexes for cleaning technically polluted water from suspended so...
Mobile 3D Mapping Using Geodetic Drones and GPS Navigation
The paper examines current trends in the development of geodetic mapping, with a particular focus on comparing traditional methods with innovative approaches. It is noted that classical techniques,...
Numerical studies of the resistance of concrete keyed joints with rectangular keys in reinforced concrete structures
Numerical investigations were carried out on the behavior of keyed joints with rectangular keys in reinforced concrete elements under different failure mechanisms. A two-dimensional nonlinear model...
Research on the drive of a plant for the preparation and transportation of building mortars
Modern mixing plants for the preparation of mortar and concrete mixtures are an important component of construction technologies, which leads to increased requirements for their energy efficiency, ...
Changes in the Stress-Strain State of Precast Reinforced Concrete Floor Systems in Masonry Multi-Storey Buildings after Non-Design Impacts
The article is devoted to investigating non-design impacts on precast reinforced concrete floor systems of multistorey brick buildings that arise during military actions. The study examines the inf...
Comprehensive analysis of stability and strength of thin-walled reinforced concrete elements based on energy approaches
This work develops and substantiates a comprehensive engineering method for the analysis of thin-walled reinforced concrete beams with a cross-sectional width of b = 40 mm, which unifies the verifi...
Design of civil defense protective structures in residential multi-story buildings for individual use
The military actions in Ukraine, which daily create a threat to the civilian population, necessitate the development of new technical solutions for new construction and the reconstruction of existi...
Strengthening Technology for Damaged Floor Slabs through Compression Zone Enlargement and External Reinforcement
The article presents a technology for strengthening reinforced concrete floor slabs by enlarging the compressed zone and using external reinforcement. A 50 mm-thick monolithic overlay is installed ...
Experience in Strengthening Prefabricated Reinforced Concrete Floor Systems During the Rehabilitation of Industrial Buildings
The article presents practical experience in combined reinforcing of precast reinforced-concrete beams and hollow-core floor panels during rehabilitation of an industrial building at the Chornomors...
Physical and mechanical properties of bitumen modified with energy-saving additives based on surface-active substances
The article examines the influence of modern energy-saving additives based on surface-active agents available on the Ukrainian market on the physico-mechanical and performance properties of BND 70/...
Green Construction: Innovations, Energy Efficiency, and Prospects for Ukraine
This article explores the concept of green construction as a pioneering approach in contemporary construction, aiming to minimize environmental impact and enhance energy efficiency. Modern approach...
Specific aspects of vertical roller mills design selection
The article analyzes specific design selection aspects of vertical roller mills, essential for grinding materials like granulated slag in the cement and mining industries. The research focuses on i...
Study of factors affecting the energy consumption of the mixing plant for the preparation of aerated concrete
The current stage of development of the construction industry is characterized by increased requirements for the energy efficiency of technological processes and the quality of building materials. ...
Machine Diagnostics in Mechatronic Systems: Analysis Methods and Intelligent Technologies
The article examines modern approaches to machine diagnostics within mechatronic systems using signal processing methods and intelligent machine learning technologies. The structure of mechatronic ...
Conditioning of boron-containing LRW with composite binders
Modern management of liquid radioactive waste (LRW) requires mandatory conditioning, which they practically carried out by cementing, most often with Portland cement. As an alternative to cementing...
Flexural Behaviour of 3DCP Beams with Expanded Metal Sheet Reinforcement: Experimental Investigation and Numerical Verification
An experimental and numerical study of the flexural behavior of 3D-printed concrete (3DCP) beams reinforced with expanded metal sheet are presented in this paper. Four-point bending tests on beams ...
Restoration measures for foundations of metal silos on degraded loess soils
This paper examines the restoration of the serviceability of foundations of steel silos located on wetted and degraded loess soils. Based on the survey results and the analysis of the recorded defo...
Analysis of the Possibility of Adapting Basement Premises in Multi-Story Buildings as Civil Protection Shelters
The article examines the possibility of adapting basement premises in multi-story buildings in light of state building code requirements. Based on drawings, the author conducted an analysis of key ...
Strain Energy Density-Based Topology Optimization Using SIMP and Local Failure Criteria for 3D-Printed Concrete Structures
This paper presents a strain energy density–based topology optimization method tailored for brittle materials such as 3D-printed concrete. Extending the SIMP framework, the approach incorporates a ...